SR11

Name/Model: SR11

Hardware solution: SoC: X2000, WiFi module: AP6256, Power supply: G2257Q51U, Ethernet: YT8531C

Color: Black/Silver

Volume control: Knob/Remote control

Weight: About 375g

Dimensions: About 157x133x32.3mm (including feet)

Working modes:

• MIX (Roon Ready and AirPlay two in one)
• Roon Ready
• AirPlay

Wireless network:

• 5G+2.4G dual-band Wi-Fi 802.11 b/g/n/ac

Max supported sampling rate for ROON receiving:

• USB: 768kHz-32bit/DSD256 (DoP)
• Actual receiving specification depends on the decoding capability of the power amp

Max supported sampling rate for AirPlay receiving:

• All PCM/DSD/MQA will be switched to 44.1kHz-16bit before output
• Coaxial: 192kHz-24bit/DSD64
• Optical: 192kHz-24bit/DSD64

MQA:

• USB/Coaxial/Optical all support MQA when in full volume

Digital output distortion:

• 0.000006% (0dB 1kHz 192kHz 24bit)

Display:

• LCD
• Sampling rate display (by LOGO light):
  • 48kHz and below: Cyan
  • Above 48kHz: Yellow
  • DSD: Green

Firmware upgrade:

• Supports upgrade through a USB flash disk (both USB-A and Type-C ports)

FiiO Control:

• N/A

Buttons and Ports

Button:

• Power button

Knob:

• Encoder knob (with volume control knob)

Digital coaxial out:

• RCA port

Digital optical out:

• Optical port

USB:

• USB-A*1 (data transmission)
• Type-C2 (data transmission1 + power supply*1)

Wired network:

• Gigabit Ethernet port

Reset hole:

• Device on, short press the button in the reset hole

Power Supply Parameters

Power consumption:

• Static current: 250mA (wired network connection, default brightness of screen and LOGO light)

Power supply:

• DC 5V/2A

Coaxial/Optical output current:

• 250mA (wired network connection, default brightness of screen and LOGO light)

USB output current:

• 290mA (wired network connection, default brightness of screen and LOGO light, no power consumption for power amp)

Battery capacity:

• No battery